Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the ball joints on the tie rods.
These are the ball joints on the tie rods. To check the tie rod ends see: TIE RODS WITH ENDS. On some stock tie rods, the ends don't come off and you will need to replace the entire tie rod. We suggest you replace it with an adjustable one. We only carry adjustable tie rods.
No customer reviews for the moment.
Part #: 111127531
8mm Fuel Line Ferrule
Application:Part #: 211703609B
Pedal Assembly Cover Plate
Application:Part #: 113101481F
This gasket goes between the valve cover and the head.
Application:Part #: 021101481
This gasket goes between the valve cover and the head.
Application:Part #: 111823651
This lever is found in the glove box.
Application:Part #: 111101481
This gasket goes between the valve cover and the head.
Application:Part #: 1115109
This oil thermostat goes in line on your external oil cooler system.
Application:Part #: 211971114
The electrical harness runs everything on the car.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:Part #: N113672
These are the screws that hold on the door panels.
Application:Part #: 6109335
These shields help protect your pushrod tubes.
Application:Part #: 025129717C
Intake Manifold Gasket
Application:Part #: 261829577
These rubber buffers go on the gates and body of single and double cab Buses to prevent the gates from banging into the body.
Application:Part #: 113847206
This is the little button that goes through the popout glass and to the latch..
Application:Part #: 6301150A
Type 2 Transmission Center Mount Only
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:
These are the ball joints on the tie rods.