Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This plug for the bottom of the sump plate has a magnet in it.
This plug for the bottom of the sump plate has a magnet in it. Some people swear by them. We feel if you have steel in the bottom of your motor, it's already a waste. If you want good protection from debris, buy a System One filter and use the stock sump screen.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 068115561B
Oil Filter use in place of HP1
Application:Part #: 1115421
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 1115450PL
The oil filler extension screws into the generator stand and comes with a fitting to vent the crankcase.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 111115175
Oil Screen 25HP engines thru 1 677 687
Application:Part #: 111115161
These nuts prevent oil from leaking around the oil pump studs.
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117106ALM
These fittings are used for the stainless steel hose.
Application:Part #: 111115131A
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 1117024
Mesa coolers are the state of the art oil coolers.
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1115140
This plug is used for plugging the outlet passage on an oil pump when full flowing oil pump. 1/4 NPT
Application:Part #: 1117022
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115449BL
Replacement Oil Cap Billet Blue
Application:
This plug for the bottom of the sump plate has a magnet in it.
