Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This kit allows you to run disc brakes in the rear.
This kit allows you to run disc brakes in the rear. We suggest you buy the front kit first, before you buy the rear kit. 70% of you braking comes from the front. This kit's a nice way to complement the front kit and it's a bolt-on application. If you have an off road car then you would only want rear disc brakes.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1615109IRS
This kit allows you to run disc brakes in the rear.
Application:Part #: 113863701K
These rubber mats go on the front and rear floors.
Application:Part #: N105001
These are the bolts that hold the engine in.
Application:Part #: 225875575
This is the cover (top) for 21 and 23 window buses
Application:Part #: 6251011
Systems are designed for max horsepower and to handle the punishment of off-road competition.
Application:Part #: 1119302CH
These cylinder head tins sit under the fan shroud.
Application:Part #: 211501293A
This nut goes on the inner side of the lower axle shaft of your large nut (46mm) recution boxes.
Application:Part #: AL25XCO
Alternator For Diesel Applications Core
Application:Part #: 113109021DBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 1301048
These straps are a good idea if you have a car with a big engine. We highly recomend that you use these in conjunction with the urethane transmission mounts.
Application:Part #: 1127109ALM
This is stainless steel braided fuel line.
Application:Part #: 113853615
These are three little plastic pieces that push into the front hood to hold the emblem in place.
Application:Part #: 620107210SS
Replacement Stainless Steel Fuel Tank Brackets 10" Diameter
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 1119431CH
These are the two pieces of tin that attach to a doghouse style fan shroud.
Application:Part #: 211405670
Spindle Nut, Right
Application:Part #: 1711303BK
Black Emergency Brake Handle Replacement
Application:
This kit allows you to run disc brakes in the rear.
