Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:This kit allows you to run disc brakes in the rear.
This kit allows you to run disc brakes in the rear. We suggest you buy the front kit first, before you buy the rear kit. 70% of you braking comes from the front. This kit's a nice way to complement the front kit and it's a bolt-on application. If you have an off road car then you would only want rear disc brakes.
Bug (Type 1): 68-72
Type 3: 68-72
Ghia: 68-72
Off-Road: 68-72
No customer reviews for the moment.
Part #: 1698152
This kit allows you to run disc brakes in the rear.
Application:Part #: 1615107
Replacement Rear Brake Bracket for Kit # 1615108
Application:Part #: 1615105
Replacement Rear Brake Rotor 4x130, 14mm x 1.5mm threads, IRS
Application:Part #: 1698152P
Premium Replacement pads for your aftermarket Disc Brakes.
Application:Part #: 6615103A
Rear Rotor for Disc brake setup, 4x130 bolt pattern, 14x1.5mm threads
Application:Part #: 1615125A
Right Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 1615124A
Left Rear Caliper 5/205 with Emergency Brake, Swing Axle
Application:Part #: 211707361C
REAR BUMPER SPLASH PAN KIT, includes left and right splash pans, seals, reinforcement brackets, rubber plugs and complete installation hardware. One kit does both sides, fits 1968-1971 Bus
Application:Bus (Type 2); 68-71
Part #: 311853587B
These are the clips that hold the various chrome moldings on.
Application:Part #: 1129507EPC
Empi Aluminum Replacement Velocity Stacks, 2 7/8" H x 2 3/4" W on top, Pair for 48 IDA/EPC Carb
Application:Part #: 6511246
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 113945110
These reflectors came on the side of the 71-72 Bug tail light housings.
Application:Part #: 211841641ABK
These handles open the side cargo doors from the inside.
Application:Part #: 6411107A
Thru Rod 8" Wider Beam, 48.75" Long, Boxed
Application:Part #: 211711179
This bushing wraps around the front shift rod.
Application:Part #: 211405681
This plate goes between the two nuts on each of the front spindles.
Application:Part #: 111598051A
The rear axle seal kit comes with the necessary replacement gaskets, o-rings, washer and seal for the bearing cap.
Application:Part #: 111115107AHD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 151857502B
These mirrors mount on the doors or door hinges so you can see what's behind you.
Application:Part #: 261813164N
This is what the battery sits on.
Application:Part #: 211721629
Pivot Pin for Accelerator Pedal Hinge
Application:Part #: 1800101
This is a "no frills", plain chrome license plate frame..
Application:Part #: 111501131
This kit contains all of the gaskets needed to rebuild a transmission.
Application: