Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This cable operates the carburetor(s).
This cable operates the carburetor(s). You should use white grease on the cable when you install it. We recommend you pack a spare accelerator cable along with your spare clutch cable. If your Bug is a 1958-65 and you are using a roller pedal, use the 2627mm cable.
Vanagon: 83-84
No customer reviews for the moment.
Part #: 211845102L
To fix the rusted out area of the front window.
Application:Part #: 111127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 2615107DWW
Front Disc Brake Kit
Application:Part #: 211611761
Master Cylinder to Pressure Regulator Brake Line
Application:Part #: 211813356I
This is a repair panel for the rear corner.
Application:Part #: 1511221
Torsion Tube End Plates, Inner, Pair
Application:Part #: 1109401SC
SCAT 1.4 Ratio Rocker Assemblies (Pair)
Application:Part #: 113819717
Fresh Air Control Box Hose (Pair)
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 181881406
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 620107208SS
Replacement Stainless Steel Fuel Tank Brackets 8" Diameter
Application:Part #: 211863665B
Seat Stand Mats, Black
Application:Part #: 113201157
Fuel Breather "T"
Application:Part #: 211255359
The heater hose goes from the fan shroud to the heater boxes.
Application:
This cable operates the carburetor(s).