Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a good, cheap dual carburetor kit for a 1600cc motor.
This is a good, cheap dual carburetor kit for a 1600cc motor. What we don't like is the throttle bushings wear out over time and you need to change the fuel hose it comes with to a German hose. If you need different jet see carburetor parts. They take stock solex idle jets and main jets.
Bus (Type 2): 1700-1800
No customer reviews for the moment.
Part #: 1129034
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 211129493
Steel Vacuum Line junction between Vacuum Advance and carburetor
Application:Part #: 049129412C
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129505002
These are some of the most common jets used.
Application:Part #: 1129044
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129199055
Accelerator Pump Jets for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 0.55
Application:Part #: 112950505IDA
Stack Hold Down Tab
Application:Part #: 1129199050
Accelerator Pump Jets for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 0.50
Application:Part #: N137761
Here are some of the replacement parts for your stock carburetor..
Application:Part #: 1129404150
These are some of the most common jets used. Sold individually. .150
Application:Part #: 1129044E
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129324
These are some of the most common jets used.
Application:Part #: 1129505007
These are some of the most common jets used.
Application:Part #: 1129512
Empi Hex Bar Linkage for 48/51 EPC and 48 IDA (works with and without Air Cleaners)
Application:Part #: 2129510
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 1129199175
Needle Valve for 40/44 HPMX (EMPI), 40-48 IDF (Weber) 1.75mm
Application:
This is a good, cheap dual carburetor kit for a 1600cc motor.