Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:The aftermarket shifters listed here, shorten the shift pattern considerably.
The aftermarket shifters listed here, shorten the shift pattern considerably. This gives you a sensation of performance and it gets rid of that sloppy feel of the stock unit. All shifters have reverse lockout.
Bug (Type 1): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1109401125
Rocker Arms, High Ratio 1.25, w/Bushing, Set
Application:Part #: T1105274
This lock works on both the 6v and 12v flywheels.
Application:Part #: 2141701A
This heavy duty arm is a good idea if you need a new clutch arm.
Application:Part #: 1401021DL
This is a brand new axle beam with adjusters already installed.
Application:Part #: 4863515
Plastic Replacement Wire Cover Replaces stock Fiberboard
Application:Part #: 6501331HD
Porsche Style 930 CV Joint 108mm OD, .875" Balls, Chromoly
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 113101353ERB
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld). Due to a shortage of cores we will need your Cylinder head Cores before sending any Rebuilt heads.
Application:Part #: 231069708
Replacement canvas for your camper.
Application:Part #: N161371
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 113867000
Headliner Install Kit
Application:Part #: 211201557E
Gas Cap Gasket, 70mm
Application:Part #: 1857100
This durable, plastic box replaces the stock cardboard glovebox.
Application:Part #: 6801119
90 Degree Gusset, .115" Thick, Set of 4
Application:Part #: 1117109
This block off plate is made to loop the oil back into the case in place of the stock oil cooler.
Application: