Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a brass tee for dual carbs.
This is a brass tee for dual carbs. We recommend you use a brass tee instead of a plastic one.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1127027
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: N138231
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113127307
This rod drives the fuel pump.
Application:Part #: 1127104ALM
This is stainless steel braided fuel line.
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 113127521A
This metal line goes from the pump around the fan shroud to the flex line that comes from the gas tank.
Application:Part #: 1129611EL
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 1127101S
This is stainless steel braided fuel line.
Application:Part #: 043129707
Intake Manifold Block
Application:Part #: 1127106ALM
This is stainless steel braided fuel line.
Application:Part #: 1127100
Hose Clamp for 5mm hose
Application:Part #: 113127511A
Fuel Line, Metal, 6mm Pump to Carburetor
Application:Part #: 1127022BL
Billet Fuel Pump Block off, Blue
Application:Part #: 113127025G
These stock pumps pump fuel into the carburetor.
Application:Part #: 1129729RD
These boots are better than stock.
Application:Part #: 113129729BS
These boots connect the intake manifold with the end casting on a stock dual port 1600cc engine. Two are required boots are sold individually.
Application:
This is a brass tee for dual carbs.
