Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The reservoir holds the brake fluid for the brake master cylinder.
The reservoir holds the brake fluid for the brake master cylinder. They don't normally go bad unless they have been left out in the weather without fluid.
Bus (Type 2): -66
No customer reviews for the moment.
Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 6721073
Deluxe Pedal Slide, Billet, with Throttle Pedal Provision
Application:Part #: 211721555T
This cable operates the carburetor(s).
Application:Part #: 5251003
2 Tip Muffler featuring 1 3/8" tubing and adjustable tips for clearance
Application:Part #: 043255106F
These are your source of heat.
Application:Part #: 251845521AM
This seal is for the rear window.
Application:Part #: 361845321ACL
These are the seals for the side of a Type 3.
Application:Part #: 113255355B
This is the hose that goes from the body to the engine.
Application:Part #: 10x825
10x825 Fan belt for racing applications only
Application:Part #: 131721349
This adjustment nut goes on the end of the cable, back by the transmission.
Application:Part #: 211971113
The electrical harness runs everything on the car.
Application:Part #: 113701421
Seat Rails, 1 Set per Seat, 2 sets per car
Application:Part #: 2311123
This steel thrust plate stops movement of the main shaft bearing and aids in the keepin the alignment of the gears on the main and pinion shafts.
Application:Part #: 1101132
A case saver is an insert that repairs worn or stripped head stud holes in a case.
Application:Part #: 211829223
Rear Hatch Striker Wedge
Application:Part #: 111511255C
Spring Plate Covers, Pair
Application:
The reservoir holds the brake fluid for the brake master cylinder.
