Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Most people don't realize that these are one of the most important parts in the motor.
Most people don't realize that these are one of the most important parts in the motor. When a rod is reconditioned the cap is separated, the bolts taken out and the cap mating surfaces ground. The rod is then put back together now having an oval hole. This hole is then machined round again. The problems we have seen are; the boring of the hole and bushing being bored crooked, throwing the rod side ways when the cylinder fires. The other problem is that, if one rod has been reconditioned once and the others five times then one rod is a lot longer than the others, affecting the compression ratio. You might have compression ratios of 7.7 in 3 cylinders and 9.1 in one cylinder; the result is an unbalanced engine and major detonation in one cylinder. The rods we carry are checked for straightness, and weighed to within 10 grams and matched for length to .005. All rods are sold in sets on an exchange basis.
Bug (Type 1): 40hp-1300
Bus (Type 2): 40hp-1300
Type 3: 40hp-1300
Ghia: 40hp-1300
No customer reviews for the moment.
Part #: 113837605A
Vent Window Assembly, Left
Application:Part #: 211415049BCO
Due to the core shortage we will need you to send in your old steering box first.
Application:Part #: JC91020
Jaycee Leak proof Pushrod Tubes, Black
Application:Part #: 1401301
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 113707191B
This special chrome bolt has a round head on it.
Application:Part #: 111867191D
Passenger Side Roof Handle
Application:Part #: 211881283
Bus Seat Pivot Bolt
Application:Part #: 113611817
This is the grommet for the reservoir line(s) where they go into the master cylinder. 17.5mmx4.5mm
Application:Part #: 251615107
Front calipers hold the brake pads that stop the rotor, which in turn stops your vehicle.
Application:Part #: 211867501
This is the vinyl covering for the inside roof and sides of the Bus.
Application:Part #: 1413005
KYB's are the best selling monotube replacement shock in the U.S.A..
Application:Part #: 111105271RC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 6801123
These tabs are used for mounting just about anything to tubing..
Application:Part #: 6823504
These fasteners take some time to put in, but they're worth the effort.
Application:Part #: 133809021BX
Front Wheel House, Lower Rear Section
Application:Part #: 211805035D
Front Nose Panel just below windshield mounts
Application:
Most people don't realize that these are one of the most important parts in the motor.