Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are a nice unit and much better for off road cars than the cast aluminum breather box. Great for sand cars.
Race/Off-Road: All
No customer reviews for the moment.
Part #: 111198029
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 6115467BK
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 1117023FAN
This is the same as the mesa cooler but with a fan mounted to it.
Application:Part #: 1115457BK
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily. Black
Application:Part #: 1115193
This plug for the bottom of the sump plate has a magnet in it.
Application:Part #: 1115452
This stock oil filler and cap has been chromed.
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117099
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: N110062
Some of the more common nuts you might need..
Application:Part #: 1115457
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application:Part #: 311115107HD
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 113115475
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1115141
This oil pump cover comes with a threaded boss.
Application:Part #: JC21010
Jaycee Mag-Plate, 6 Bolt, Red
Application:Part #: JC21020
Jaycee Mag-Plate, 6 Bolt, Black
Application:
