Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Most people don't realize that these are one of the most important parts in the motor.
Most people don't realize that these are one of the most important parts in the motor. When a rod is reconditioned the cap is separated, the bolts taken out and the cap mating surfaces ground. The rod is then put back together now having an oval hole. This hole is then machined round again. The problems we have seen are; the boring of the hole and bushing being bored crooked, throwing the rod side ways when the cylinder fires. The other problem is that, if one rod has been reconditioned once and the others five times then one rod is a lot longer than the others, affecting the compression ratio. You might have compression ratios of 7.7 in 3 cylinders and 9.1 in one cylinder; the result is an unbalanced engine and major detonation in one cylinder. The rods we carry are checked for straightness, and weighed to within 10 grams and matched for length to .005. All rods are sold in sets on an exchange basis.
Bug (Type 1): 1600
Bus (Type 2): 1600
Type 3: 1600
Ghia: 1600
Thing (Type 5): 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 1198090ACH
90.5mm Pistons & Cylinders - 69mm Stroke CHINA
Application:Part #: 111837215A
This is the return spring in the early Bug front door handles.
Application:Part #: 261827500
Engine lid Mechanism Hardware Kit
Application:Part #: 021119957
Oil Pressure switch boot
Application:Part #: 111721365
The clutch cable boot goes over the end of the bowden tube where the cable moves in and out.
Application:Part #: 211898001
Bus Ignition, 2 front locking door handles, cargo door (Not Panel) and rear hatch handle all keyed alike, only 2 keys included!
Application:Part #: 113945109
These reflectors came on the side of the 71-72 Bug tail light housings.
Application:Part #: 211841635B
Collar, for Cargo door handle and "T" Style rear hatch handle
Application:Part #: N203761
Tank Breather Hose 10mm ID, per foot
Application:Part #: 211955409B
The arms extend from the shaft to hold the wiper blades, very rarely do they fail..
Application:Part #: 261829565A
This key is what the factory gave you to open the engine door and the gas door on buses up to 1966..
Application:Part #: 1853603
These aftermarket scripts easily attach to your hood or anywhere else you choose to put them..
Application:Part #: 186360911
These ride on the tunnel from the shifter forward.
Application:Part #: 113201157
Fuel Breather "T"
Application:Part #: 113115451D
Oil Filler with Tube
Application:Part #: 1601131A
Chrome Lug Nuts, 7/16"x20 (Chevy), Acorn 60 degree Style, Set of 5
Application:
Most people don't realize that these are one of the most important parts in the motor.
