Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Fresh Air Flap Hinge
Fresh Air Flap Hinge
Bus (Type 2): 1968-79
No customer reviews for the moment.
Part #: 4885401CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 1501622
Aluminum Wheel Spacer, Double Drilled 4x130 & 5x130; 1/4" Thick
Application:Part #: 113711333BGY
This is the button that you push to release the brake.
Application:Part #: 1827329
This spring replaces the stock spring you might have thrown away when you put the deck lid stand offs on.
Application:Part #: 211801404EK
This is a section of ther rear cargo floor.
Application:Part #: 1101141
1/2" Longer 10mm Case Studs
Application:Part #: 1615106
This kit allows you to run disc brakes in the rear.
Application:Part #: 62010718E9
End Fill 10x30" Polished Stainless Steel Gas Tank
Application:Part #: 1847100CWG
This Bug Safari window is constructed as a dual-channel, mild-steel frame with a chrome finish that accepts 3/16" safety glass and an outer lip seal. This chrome options arrives pre-assembled
Application:Part #: 1129710
EMPI Single HPMX/IDF Manifold for Type 1 engines
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 131415813E
These are the ball joints on the tie rods.
Application:Part #: 1511242
These grommets go on the spring plates in the torsion housing of your car.
Application:Part #: 113953163
Turn Signal Chrome Housing, Each
Application:Part #: 111881364
This is the padding that sits on top of the springs of the seat.
Application:Part #: 1601066BK
Empi Sprintstar Black 5x205, 5"x15"
Application:
Fresh Air Flap Hinge