Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the lens and seal for the light that shines on the license plate. They are held in by two small Phillips screws.
Bug (Type 1): 53-57
No customer reviews for the moment.
Part #: 113845521AAM
This seal is for the rear window.
Application:Part #: 135945191
This seal goes between the tail light housing and the body of the car..
Application:Part #: 2847521B
This seal goes on the body of the bus, that the safari window closes against.
Application:Part #: 021256092T
These are your source of heat.
Application:Part #: 211711629L
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:Part #: 151853355A
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: 211953052E
Turn Signal Bulb Holder, RIGHT
Application:Part #: 113012900
A broken one can give bad reception and a coat hanger isn't much better.
Application:Part #: 111035313
Trim Plate, Radio To Dash
Application:Part #: 113867504
This is the vinyl covering for the inside roof and sides of the Bug.
Application:Part #: 113898806
Rear Cargo Area Insulation Kit
Application:Part #: 1615108DLX
Rear Disc Brake Kit, w/o Emergency brake, w/ HD Cast Mounting Brackets 4x130 bolt pattern
Application:Part #: 211498211BWG
These spindles have reconditioned king pins and are ready to bolt back on. These spindles will give you the stock ride and give you that lowered stance. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a...
Application:Part #: 2501102
This converts all 1967 and prior buses to independent rear suspension.
Application: