Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is a breather box that will give excess "blow by" a place to go.
This is a breather box that will give excess "blow by" a place to go. If you are running a motor with more than 9 to 1 compression ratio you will need this box. Motors with lower compression do not need this box, no matter how big. This is not a good system for off-road cars.
Bug (Type 1): 1600
Type 3: 1600
Ghia: 1600
Thing: 1600
Race/Off-Road: 1600
No customer reviews for the moment.
Part #: 111115107AK
VW flat cam, 21mm, 8mm Stud Oil Pump
Application:Part #: 1117007SS
This is the high-temp/pressure hose wrapped with braided stainless steel.
Application:Part #: 1117108
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: JC22660
Jaycee Street Oil Filter Bracket, Black
Application:Part #: 1115181
A stock sump plate that has been chromed..
Application:Part #: 111115111B
The oil pump is the heart of the engine, so it is very important to choose the right one.
Application:Part #: 021117151A
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 311115541
This boot goes on the end of the dump tube.
Application:Part #: 1115456
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 1115106A
This is a great way to increase the oil capacity of your engine.
Application:Part #: 1115431
This hex drive replacement plug is for the case relief spring(s).
Application:Part #: 1117102
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: JC21010
Jaycee Mag-Plate, 6 Bolt, Red
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:
This is a breather box that will give excess "blow by" a place to go.
