Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
The rear wheel attaches to the rear brake drum.
The rear wheel attaches to the rear brake drum. Make sure you torque the axle nut to 250 ft. lb., we don't want any wheels falling off. We suggest you drive the Bug for a day and tighten the nut again. For some reason the nut seems to loosen up the first time. Always use a cotter pin to lock the nut. If the hole doesn't line up, tighten it a little bit more until it does. Never, ever back the nut off to line up the hole.
No customer reviews for the moment.
Part #: 113609205A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211609209A
These are the screws and adjusting stars that freeze up and keep you from adjusting your brakes.
Application:Part #: 211698301
This kit is for rebuilding the wheel cylinder.
Application:Part #: 211611047F
This hydraulic slave cylinder is found in the rear brake backing plate.
Application:Part #: 251698003
This kit has all the springs, pins and keepers for drum brakes.
Application:Part #: 251609537
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 221847219
This triangular plate is welded to your bus to allow you to screw in your pop-out window latch.
Application:Part #: 211405692A
Grease Cap, Right
Application:Part #: 1601029
These are a reproduction of the famous BRM racing wheel.
Application:Part #: 1129700
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: F1002
These are the glues and oils we use..
Application:Part #: 1601059APL
Empi Raider, Anthracite, 5x205, 5"x15"
Application:Part #: 1119025BK
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 151701061M
Floor Plate, Left, Convertible only
Application:Part #: 131611781
These are the metal brake lines found throughout the car.
Application:Part #: 6707304KIT
Double Tube Rear Bumper Shock Tower Mount, Kit
Application:Offroad; All
Part #: 151885403
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 221955407ABR
The arms extend from the shaft to hold the wiper blades, very rarely do they fail.. BRAZIL
Application:Part #: 1601063A
Empi 4 Spoke, Anthracite, 4x130, 15x5.5"
Application:Part #: 311119665A
Cool Air Intake Bellow
Application:Part #: 112920236
36mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
Application:Part #: 221885595
This is the bracket that screws to the rear seat then screws to the body
Application:
The rear wheel attaches to the rear brake drum.
