Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This seals the front turn signal housing from the fender.
This seals the front turn signal housing from the fender. It comes with a rubber tail for the wires.
Ghia: 70-74
No customer reviews for the moment.
Part #: 1405315
Type 1 2.5" Drop Spindles for 5/205 Disc Brakes Ball Joint Front End
Application:Part #: 025109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 1115107FF
30mm Oil pump for Dual Relief & Flat cam Full Flowed Engines
Application:Part #: 021256091M
These are your source of heat.
Application:Part #: JC21040
Jaycee Mag-Plate, 6 Bolt, Silver
Application:Part #: 211841691A
These rubber bumpers go on the side doors to keep them from banging into the body on buses 1950-1967.
Application:Part #: T1301142
This is a "must" for your tool box.
Application:Part #: 113863701K
These rubber mats go on the front and rear floors.
Application:Part #: 113819661G
These are the knobs for the wiper and light switches on the dash.
Application:Part #: 03214
These are the parts found in the distributor.
Application:Part #: 113611829A
Master Cylinder to Bulkhead Spacer
Application:Part #: 6721559
These are heavy, heavy duty cables.
Application:Part #: 1101031
Included in this kit are the bolts, nuts and washers required for "out to head" assembly of the engine..
Application:Part #: 1109339
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 111837471
Inner and Outer Window Scraper, Set of 4
Application:Part #: 133711717
Heater cables open the flaps in the heater boxes allowing heat into the car.
Application:
This seals the front turn signal housing from the fender.