Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Rear Bumper Mount
Rear Bumper Mount
Bug (Type 1): -60
Offroad: -60
No customer reviews for the moment.
Part #: 211609537E
These shoes or linings are in the rear drums and are new, so no exchange.
Application:Part #: 651300424
Suspension Limit Straps 24", Pair
Application:Part #: 1903109SHIM
Billet Alternator/Generator Pulley Shim Kit (Pack of 5)
Application:Part #: 113903515
These are the bearings and brushes for your generator.
Application:Part #: 021101481
This gasket goes between the valve cover and the head.
Application:Part #: 113881245B
Forward/Back Seat Adjustment Spring, Each
Application:Part #: 211703071B
Front End Support Kit (3 Pcs) Inner Structure
Application:Part #: 113853505C
This is the front strip that goes down the front hood.
Application:Part #: 131415802C
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 113109021GBR
We've had no luck with regrinds, therefore we sell only new camshafts.
Application:Part #: 1129507EPC
Empi Aluminum Replacement Velocity Stacks, 2 7/8" H x 2 3/4" W on top, Pair for 48 IDA/EPC Carb
Application:Part #: 141943121A
License Light, Lense (2 Required per car)
Application:Part #: 1105169
These cranks are made from stock German core cranks.
Application:Part #: 2251002
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 620107208SS
Replacement Stainless Steel Fuel Tank Brackets 8" Diameter
Application:Part #: 1903032
These are the three pieces of tin that go on the back of the generator or alternator.
Application:
Rear Bumper Mount
