Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:These shoes or linings are in the rear drums and are new, so no exchange.
These shoes or linings are in the rear drums and are new, so no exchange. A set is four shoes; two per drum. Note: It is a good idea to purchase two new horse shoe clips and two new cotter pins as well.
Bus (Type 2): 73-79
No customer reviews for the moment.
Part #: 1251202D
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 211801392CE
Inner Rocker Panel, Right
Application:Part #: 251807035R
Bumper Strip Retaining Clips (Set of 10)
Application:Part #: 01013
These are the parts found in the distributor.
Application:Part #: 1117107ALM
No. 8 Gauge Adapter with 1/8 NPT
Application:Part #: 025109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 211707135A
Front Bumper Bracket, Left
Application:Part #: 1415802B
This is a great way to dress up the front end of your car.
Application:Part #: 61151062C
Clamps for Engine Oil Accumulator 2 QT capacity
Application:Part #: 113863509B
Front Trunk Liner
Application:Part #: 111809635E
Rear Bumper Mount, Brazilian Universal
Application:Part #: 1117011
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 04170
These are the parts found in the distributor.
Application:Part #: 1971110
These block are great for wiring.
Application:Part #: 113251053AQ
This is the exhaust silencer.
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application: