Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This tin goes from one piece of cylinder tin to the other.
This tin goes from one piece of cylinder tin to the other. It mates up with the tin that is behind the crank pulley. They make two styles of crank pulley tin, so it's very important that you use the early, short style tin with one of these. The fit is poor.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
No customer reviews for the moment.
Part #: 1119303CH
These cylinder head tins sit under the fan shroud.
Application:Part #: N107101BSS
6mm Allen Head Tin Screws Stainless Steel
Application:Part #: 1119027BK
This small fan shroud came on the 36hp motor.
Application:Part #: 1119527BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119026CH
This style fan shroud combines the small shroud of the 36hp and the later doghouse style shroud.
Application:Part #: 1119533BK
This tin goes behind the crank pulley.
Application:Part #: 131119357
These are the short pieces that fit under the big cylinder tin towards the crank pulley.
Application:Part #: 1119517CH
This piece of tin goes behid the engine towards the flywheel and screws down to the cylinder tins.
Application:Part #: 113119031A
This is the fan that fits inside of the fan shroud on Bugs 1971-1979 and a 1971 Bus.
Application:Part #: 043119352
Heater Channel Tin Lower Right
Application:Part #: 1119317BK
Cool tins are must for those of you with high performance exhaust systems without heater boxes.
Application:Part #: 1119528CH
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 1119352CH
These three pieces of tin go from the heater boxes to the case.
Application:Part #: 1903032CH
These are the three pieces of tin that go on the back of the generator or alternator.
Application:Part #: 111119571
In the stock front pulley tin, there is a hole for the 1" hose coming down from the stock air cleaner.
Application:Part #: 1119023
This spacer kit uses 1 1/4" thick aluminum spacers to close the gap between the fan shroud and the cylinder tins where the sheet metal screw attaches.
Application:
This tin goes from one piece of cylinder tin to the other.
