Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover that is over the handle. Behind it you will need to remove the phillips screw. The handles that fit the Vanagon (#321 837 581) will work on the 68 and later Bugs, Buses and Type 3's and are a heavier duty than the stock one.
Bug (Type 1): 68-79
Bus (Type 2): 68-79
Vanagon: 80-92
Type 3: 68-74
Ghia: 68-74
Race/Off-Road: 68-79
No customer reviews for the moment.
Part #: 1711140BIL
Billet Shift Knob, 7/10/12mm Threads
Application:Part #: 211809101F
This is the most common place for rust on your bus.
Application:Part #: 133809021BX
Front Wheel House, Lower Rear Section
Application:Part #: 111837418
Window guide channel at the rear of the door, Right side
Application:Part #: 111821306Q
These are new rear fenders.
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 071256052
Heat Riser Elbow, Right
Application:Part #: 6801242
Billet Foot Rest for 1" Tubing, Each
Application:Part #: 113801401A
Seat Pedestal, 2 pedestals per Seat, 2 sets per car
Application:Part #: 111837502D
Window Regulator, Right
Application:Part #: 111711149B
Shifter Stop Plate
Application:Part #: 251407361
These joints are located in the ends of the control arms.
Application:Part #: 6415811A
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 LH
Application:Part #: 113881607A
This knob and guide allows you to release the back of the front seat.
Application:Part #: 111945231
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 211259325B
Heater Cable Retaining clip
Application:
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.