Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This gasket goes between the valve cover and the head.
This gasket goes between the valve cover and the head. We usually put them on dry. If they leak, use a sealer called Gasgacinch on the valve cover side of the gasket only and just under the bottom of the head side. If they still leak, replace the valve cover bail and maybe even the cover itself. Never use 3M glue on these unless you never, ever plan to get them off again. I hate to say it but these new ones are really thin and I find myself having to glue two gaskets together. So I would buy 4 of them.
Bug (Type 1): 36hp
Bus (Type 2): 36hp
Ghia: 36hp
No customer reviews for the moment.
Part #: 1101396
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101356
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101342
36 HP Barrel Shims .020 (4)
Application:Part #: 1107432
Not our favorite type of piston pin keeps.
Application:Part #: 111198057
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 1198160
These rings are cast iron.
Application:Part #: 311101353A
New single port head.
Application:Part #: 111101401B
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 1101354
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101383
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1101484
This is like a stock gasket except it is made out of rubber instead of cork.
Application:Part #: 1109604
Valve seats are used in the big valve heads.
Application:Part #: 1101399
Whether your motor lives or not can depend upon this little shim.
Application:Part #: 1198094BCH
94mm Pistons & Cylinders set with a 82mm Stroke CHINA
Application:Part #: 1198160B
These rings are cast iron.
Application:Part #: 1101472
If you like clip on valve covers these are the best that we have seen.
Application:
This gasket goes between the valve cover and the head.
