Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:The crankshaft rides in the main bearing.
The crankshaft rides in the main bearing. We prefer the K&S brand. Std, Std, Std.
No customer reviews for the moment.
Part #: 021105275
Flywheel lock washer
Application:Part #: 1903108PL
EMPI Serpentine Belt System
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 1105169F
Forged 69mm Counter Weighted Crankshaft
Application:Part #: 021105289
Endplay Shim .38mm
Application:Part #: 1105277
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 021105701ABR
These are the shells that go in the rods and ride on the crank.
Application:Part #: 1105401A
These connecting rods are longer than stock.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111105271CO
Core
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 111105713A
Rod Bearings .20
Application:Part #: 1105261
Adjustable Timing Pointer
Application:Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 111105279A
Flywheel to Crank Seal Paper 36 HP
Application:Part #: 1105271
If your are going to run a 69mm or a 78 mm counterweighted crank, then you will want to have your flywheel 8 doweled or get a flywheel has been 8 doweled.
Application: