Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover that is over the handle. Behind it you will need to remove the phillips screw. The handles that fit the Vanagon (#321 837 581) will work on the 68 and later Bugs, Buses and Type 3's and are a heavier duty than the stock one.
Bug (Type 1): 68-69
Ghia: 68-69
No customer reviews for the moment.
Part #: 1805055
This tray mounts behind the rear seat.
Application:Part #: F1101
These are the glues and oils we use..
Application:Part #: 1517289
These seals fit into the CV joint flange to keep the axle from beating the transmission cup and to keep the transmission oil out of the CV joint.
Application:Part #: 111881285
When you mount the middle seat, you'll want the rubber mat down and the bolts in the key slots first.
Application:Part #: 113101219
It's possible to put a generator on an alternator stand but not the other way around.
Application:Part #: 1827152
These are a must if you live in an area were the temperature reaches 100 degrees or more.
Application:Part #: 2601030
Fuchs Chrome, 5x112, 5.5"x15"
Application:Part #: 111809085B
Rear Bumper Mount, Left
Application:Part #: 211809586
Rocker Panel, Lower Right
Application:Part #: 1129039
This is a good, cheap dual carburetor kit for a 1600cc motor.
Application:Part #: 111513475B
Shock bolt
Application:Part #: 025903137G
Fan Belt for Vanagon 10x1100
Application:Part #: 111857131L
Locking Glove Box Latch w/keys
Application:Part #: 211843642ABK
Inside side door handle
Application:Part #: 2251007
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application: