Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This electric pump replaces your stock pump.
This electric pump replaces your stock pump. We are not fond of electric pumps and suggest you do not run one unless necessary. In case of an accident, unlike the manual pump, the electric pump continues to pump fuel. However, if your case doesn't have a pump boss, one of these pumps will be needed. We strongly urge you to run a fuel pressure regulator with this pump. The needle and seat in the carburetor can only handle 3.5 lbs of pressure and it's common for electric pumps to put out much more than that.
No customer reviews for the moment.
Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 1127101S
This is stainless steel braided fuel line.
Application:Part #: 1127105ALM
This is stainless steel braided fuel line.
Application:Part #: 113127025D
These stock pumps pump fuel into the carburetor.
Application:Part #: 111127531A
6mm Fuel Line Ferrule
Application:Part #: 043129617A
Air Intake Boot for Fuel Injection
Application:Part #: 1127112
This regulator adjusts the fuel pressure to you carburator.
Application:Part #: 1129604EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 111127541A
6mm Fuel Line Union Nut
Application:Part #: 113127303
The fuel pump sits on this little stand and it's also the guide for the push rod.
Application:Part #: 311129707
These are the gaskets used between the intake manifold and the cylinder head.
Application:Part #: 113129709D
Dual Port Manifold End Casting - Left
Application:Part #: 311133261A
These o-rings should be replaced whenever you replace a fuel injector, or if they are old and cracked.
Application:Part #: 1129610EL
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1127022BL
Billet Fuel Pump Block off, Blue
Application:Part #: 1127110
This is a brass tee for dual carbs.
Application:
This electric pump replaces your stock pump.
