Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is just a stock style bolt that is chromed.
This is just a stock style bolt that is chromed. They are handy if you are running any kind of mag that use a concave style bolt, such as the Empi 8-spoke and the Riviera.
Bug (Type 1): -67
Ghia: -66
Off-Road:-67
No customer reviews for the moment.
Part #: 211611743
Brake line grommet
Application:Part #: 311853535C
Chrome Aluminum Molding Kit, 8 Piece without Side Marker
Application:Part #: 111837625B
Vent wing seals on the front doors keep out the elements.
Application:Part #: 6801204
These aluminum mounts are made to go around tubing so you can mount your "stuff" in style..
Application:Part #: 1101476BWG
Wolfgang Billet Valve Covers There are a few companys making billet valve covers and I have used a few of them and liked them. But we decided to make our own with a few differences.
Application:Part #: 211707001AM
Complete Front Bumper assembly MINUS mounting brackets, coated in primer
Application:Part #: 211845521
This seal is for the rear window.
Application:Part #: 211843106
Bus Sliding Door Skin 17" tall (450mm)
Application:Part #: T1129307
This is a great way to get larger jets with out having to buy a lot of new jets.
Application:Part #: 111837595A
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 211813356I
This is a repair panel for the rear corner.
Application:Part #: 111405681
This plate goes between the two nuts on each of the front spindles.
Application:Part #: 211425021ABR
This little shock goes from the center pin arm or pitman arm to the front axle beam or frame.
Application:Part #: 1129701
We've found that dual carbs work better than any single carburator set up.
Application:Part #: 112920330
30mm Main Venturi for 40IDF or HPMX
Application:Bug (Type 1); IDF
Bus (Type 2); IDF
Type 3; IDF
KG; IDF
Thing; IDF
Off Road; IDF
Part #: 021199231C
They mount on the crossbar of 68 and later Buses.
Application:
This is just a stock style bolt that is chromed.
