Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
New 1600 Crankshaft
This is a new 1600 crank. If you don't have a core or want a STD\STD crank this is the way to go. There is no core charge on this crank as it is new.
No customer reviews for the moment.
Part #: 113837235AGY
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 111119571
In the stock front pulley tin, there is a hole for the 1" hose coming down from the stock air cleaner.
Application:Part #: 241853579K
Body Molding End Cap Kit, finishes the ends of the early Deluxe Bus Body Molding, 14 piece kit
Application:Part #: N603102
This is the colored insert that goes in the deluxe molding of a bus. It does shrink so bunch it up when putting it in.
Application:Part #: 211798005A
Splash Pan Install Kit
Application:Part #: 1117101ALF
These fittings are used for the stainless steel hose.
Application:Part #: 068251053D
This is the exhaust silencer.
Application:Part #: 111498041WG
These spindles have reconditioned king pins and are ready to bolt back on. They are sold on an exchange basis and come with new king pins and link pins. Ready for you to install. If you would like to order these before sending your old arms in, please add part number 111498041WGC to your order. That is the core charge. Once you send back your old...
Application:Part #: T1301101
Pinion Nut Socket
Application:Part #: N14402140
Some of the most common studs you might need. Stud 8mm x 40mm
Application:Part #: 113957371
This ring goes around the speedometer head.
Application:Part #: 1711106
Short trigger reverse lock out shifter.
Application:Part #: 113501305
Inner Wheel Bearing Spacer
Application:Part #: 1115349
This plate will block off the type 3 oil filler hole in a universal case.
Application:Part #: 1898123
These window seals don't have the groove in them for the chrome trim, giving the car the Cal Look.
Application:Part #: 1857207BK
These panels go in the dash so you can install gauges.
Application:
New 1600 Crankshaft
