Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 151837628A
For convertibles, this is the upper pin that the vent wing pivots on.
Application:Part #: 11182150A
Running Board Right
Application:Bug (Type 1). 52-66
Part #: 1698152
This kit allows you to run disc brakes in the rear.
Application:Part #: 043101129
This is the washer used under the nuts on cases that use an o-ring on the center main studs.
Application:Part #: 111837571B
Door Window Lift Channel fits both sides
Application:Part #: 6863605
This is a console with two or three gauge holes (2 1/16").
Application:Part #: F112050P
PennGrade 20w50
Application:Part #: 6611796
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application:Part #: 111721507FHD
This is the pedal that works the throttle.
Application:Part #: 211255725E
Heater Tube Insulating Cover, Rear Fork
Application:Part #: 6801227
Billet Shaped Bracket, 1 3/4", 3/8-16 Threads
Application:Part #: 1119027CH
This small fan shroud came on the 36hp motor.
Application:Part #: 113853111B
Door Panel Molding Set 5 pcs
Application:Part #: 1115183
This plate is made out of a solid piece of aluminum.
Application:Part #: 211405671
Front Wheel Bearing Nut, Left, 32mm
Application:Part #: 6611797
Universal Bleeder Valve, 1/8" NPT, Pair
Application:
ECP part numbers are for the regular crimp style electrical ends.
