Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Brake Master Cylinder GERMAN
Brake Master Cylinder GERMAN
You will need a Power Bleeder when installing this Master Cylinder
Bus (Type 2): 1971-79
No customer reviews for the moment.
Part #: 211611817A
This is the grommet for the reservoir line(s) where they go into the master cylinder.
Application:Part #: 281611349
This cap sits on the top of the brake fluid reservoir filler hole.
Application:Part #: 211611313J
The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 211611313G
This reservoir is for a 68-72 Bus. The reservoir holds the brake fluid for the brake master cylinder.
Application:Part #: 211611309
Brake Fluid Reservoir, includes cap
Application:Part #: 211611309B
Brake Fluid Fill Reservoir
Application:Part #: 211611313K
Brake Fluid Reservoir for Servo Assisted Braking system 85mm/3.34" hole spacing
Application:Part #: 211611833C
Brake Line Grommet (2 per bus)
Application:Part #: 211611905
Brake Servo
Application:Part #: 251611301K
Dual Circuit Brake Fluid Reservoir
Application:Part #: 2863620B
This handy basket hangs from the vent slots to allow you to finally have the cup holder you've always dreamed of. The front spring loaded pocket is a nice place to store your cell phone, or maybe to hold your registration for when the cops pull you over for going too slow. Available in black and white.
Application:Part #: 111885590KIT
These are the parts needed to hold the back of the rear seat up.
Application:Part #: 133823719
This is the seal that goes on the body for the front hood to sit on.
Application:Part #: 231069411
These rubber kits are for restoring your camper style windows..
Application:Part #: 113798900
Stock Replacement Pedal Assembly
Application:Part #: 2711104
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: ECX25BL
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 211801051JR
This area tends to rust.
Application:Part #: N136612
Vent Window Pivot Rivet, Secures Vent Window To Upper Bracket
Application:Part #: 251721555
This cable operates the carburetor(s).
Application:Part #: 311141025E
The clutch cover is also known as a pressure plate.
Application:Part #: 113721002
Pedal Assembly Bushing Kit
Application:Part #: 211707105A
This is what gets smashed up first in an accident.
Application:Part #: 1105182
This crankshaft is made of E4340 chromoly forging, one of the strongest metals known to man.
Application:Part #: 211837206
These are the front door handles.
Application:Part #: AL27X
This unit supplies the battery with voltage.
Application:
Brake Master Cylinder GERMAN