Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
ECP part numbers are for the regular crimp style electrical ends.
ECP part numbers are for the regular crimp style electrical ends. ECX part numbers are the factory style ends. You will need a special pair of pliers (see ELECTRICAL END PLIERS in TOOL SECTION) to install ECX ends. The ECX are better than the regular crimp ends.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 113101475B
These are good bolt on valve covers. Black in Color
Application:Part #: 111801171C
The heater channel carries heat form the heater boxes to the front of the car.
Application:Part #: 021251261
This is the gasket for the Heater Box to Muffler
Application:Part #: 1821305C
These were originally sold as an accessory by the dealer.
Application:Part #: 6415060C
This is a replacement cover for your stock steering box.
Application:Part #: 1129729
These boots can be put on without taking the intake manifold apart and should be used only in an emergency.
Application:Part #: 113845521CL
This seal is for the rear window.
Application:Part #: 043129893
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 311953513BGR
This switch tells the flasher which way to send the current.
Application:Part #: 1837433
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 6707301
These bumpers are made for Baja Bugs.
Application:Part #: 211837813A
Front Door Sliding Window Latch Plates, Stainless Steel
Application:Part #: 111863402
This is a full carpet kit.
Application:Part #: 211707291
This is the rubber pads that are on the ends of the front bumper on a 1968-1972 Bus..
Application:Part #: 021101361K
All of our rebuilt cylinder heads are built from non-cracked or non-welded head cores (rebuilt welded heads will usually crack again next to the weld).
Application:Part #: 113853585B
These are the clips that hold the various chrome moldings on.
Application:
ECP part numbers are for the regular crimp style electrical ends.
