Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the shells that go in the rods and ride on the crank.
These are the shells that go in the rods and ride on the crank.
No customer reviews for the moment.
Part #: 111105209
CRANKSHAFT GEAR, timing, 36hp engines
Application:Part #: 111105245
This seal goes behind the flywheel.
Application:Part #: 111105259
The bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105277
Here are some flywheel pins that give you more contact surface on the flywheel.
Application:Part #: 1105219
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
Application:Part #: 111105279A
Flywheel to Crank Seal Paper 36 HP
Application:Part #: 1105253RD
This is a crank pulley for an upright motor.
Application:Part #: 211105271CCO
200mm Flywheel Core 6v w/O-Ring
Application:Part #: 111105433
Wrist Pin Bushing.
Application:Bug (Type 1); 40hp
Bus (Type 2); 40hp
KG; 40hp
Part #: 1105259
This is a chrome stock bolt and washer that holds the crankshaft pulley on.
Application:Part #: 1105254BK
This is a crank pulley for an upright motor.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 311105295A
This seal goes in the flywheel.
Application:Part #: 113105271BRC
These flywheels have been reconditioned and are sold on an exchange basis. Currently out of stock of cores. MUST send core before we can ship flywheel.
Application:Part #: 111105213
This key goes into the crank to align the steel cam gear with the brass distributor drive gear.
Application:Part #: 113105101A10
These are used cranks with reground rod and main journals.
Application:
These are the shells that go in the rods and ride on the crank.
