Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This key is what the factory gave you to open the engine door and the gas door on buses up to 1966.
Bus (Type 2): -66
No customer reviews for the moment.
Part #: 1813110
This polished stainless steel firewall dresses up your engine compartment.
Application:Part #: 211415617
This rubber seal goes around the steering column to seal off air coming through the floor.
Application:Part #: ESP911
ECP part numbers are for the regular crimp style electrical ends.
Application:Part #: 71028
This filter goes in line with the fuel line, keeping dirt or rust out of the carburetor.
Application:Part #: 6517283
These conversion flanges will allow you to run bigger stronger Bus or 930 CV joints..
Application:Part #: N177512
These are some of the fuses and bulbs that you might need.
Application:Part #: 211801051IL
This area tends to rust.
Application:Part #: 1115183BL
This plate is made out of a solid piece of aluminum. Blue
Application:Part #: 133807397
These grommets go on the fenders or the body where the bumper brackets go through..
Application:Part #: 2080123
This overhead fiberglass gauge housing is designed to fit all busses 1955-1967.
Application:Part #: 211498211CWG
These spindles have reconditioned king pins and are ready to bolt back on. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. Due to the core shortage on these spindles you will need to send us your old ones first.
Application:Part #: 1129505
Empi 40/44/48 IDF & HMPX Extended Emulsion Tube Holder
Application:Part #: JC22960
Jaycee Billet Full Flow Pump Cover w/ -8 O-ring Fitting, Blue
Application:Part #: 211405439
This seal goes between the arm and the spindle on buses with king and link pin front ends.
Application:Part #: 6501331W
CV Boot Torque Plate (3 per Boot) for 930
Application:Part #: 211837476
The front door window rolls up and down between two rubber seals. This is the inner one.
Application:
