Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:Vent wing seals on the front doors keep out the elements. They're a real chore to install. Start by taking the vent wing out and drilling out the rivet at the top. Replace the rubber seal and put in a new rivet.
Type 3: 62-74
No customer reviews for the moment.
Part #: 111109623
25/36 HP Valve Springs (Set of 8)
Application:Part #: 231070708
This seal goes around just the pop top portion of a camper..
Application:Part #: 6945201LED
LED Offroad Tail Light, Pair 4" OD with 1/2" mounting bolt, 3 wire
Application:Part #: 315198163A
Rings on the pistons are there to eliminate "blow-by".
Application:Part #: 111209181
Reserve Lever Clip
Application:Part #: 6801106
Chromoly Tall Seat Mounting Tab, radiused for 1 1/2" tubing
Application:Part #: 255853345
These chrome moldings for American style seals go around the windows and are just for looks.
Application:Part #: N171214
These are some of the fuses and bulbs that you might need.
Application:Part #: 113255483
These are the vents that clip into the dash.
Application:Part #: 111945263F
Taillight Bulb Holder, each
Application:Part #: 211707135D
Front Bumper Bracket, Left
Application:Part #: 04008
These are the parts found in the distributor.
Application:Part #: 6707102
These bumpers are made for Baja Bugs.
Application:Part #: 1129506IDA
Velocity Stack Covers, for 48IDA/EPC 48 & EPC 51 Carbs, Pair
Application:Part #: 6611795
A two pound residual pressure valve is recommended for disc brake applications while a 10 pound valve is mostly used on drum brake applications..
Application: