Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Vent wing seals on the front doors keep out the elements. They're a real chore to install. Start by taking the vent wing out and drilling out the rivet at the top. Replace the rubber seal and put in a new rivet.
Bug (Type 1): 65-72
No customer reviews for the moment.
Part #: 211201551GR
The most common reason, for replacing a cap is forgetting to put it back on at the gas station.
Application:Part #: 211601150
Beauty rings fit under the hubcap to improve the look of your stock rim.
Application:Part #: 113415802B
These two rods go from the center pin on a Bus or the pitman arm on a Bug, to the spindles, making the car turn.
Application:Part #: 022198075ACH
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 113837235ABK
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 1601153
Replacement Cap, EMPI Logo, Push-On Chrome, 5/8" Inside Height
Application:Part #: 211405631
Front Bearing Spacer (1 per side)
Application:Part #: 1129051AER
EMPI Dual 51 IDA Carburetor Kit
Application:Part #: 251813226A
This seal goes between the body and the engine.
Application:Part #: 211813163M
This is what the battery sits on.
Application:Part #: 021105291
Endplay Shim .40mm
Application:Part #: 311501615E
The rear wheel attaches to the rear brake drum.
Application:Part #: 6821021N
These kits are really thick and have a great fitting hood.
Application:Part #: 1117113
This adapter replaces the stock oil cooler with two hoses to reroute the oil to an external oil cooler.
Application: