Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This boot goes over the E-brake handle to hide the cables. To put this boot on, just slide it over the handle. On 68 on buses you will need to take some of the handle apart to get it on.
Bus (Type 2): 50-79
No customer reviews for the moment.
Part #: 221847081D
These are the latches that hold the popout frame out.
Application:Part #: 111837021B
Door Lock Remote, Left
Application:Part #: 133877306
These are all of the parts that we can get our hands on for metal sunroof bugs.
Application:Part #: N203741
We only carry metric hose.
Application:Part #: 1881213
We really like the style and comfort that these seats provide.
Application:Part #: 113945241A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 261813163M
This is what the battery sits on.
Application:Part #: 255837703
Window Scraper, Outside Left
Application:Part #: 133821306A
These are new rear fenders.
Application:Part #: 1129048AE
EMPI Dual 48 IDA Carburetor Kit
Application:Part #: 113129901
This is the tube that goes through the fan shroud that the accelerator cable threads through.
Application:Part #: 111109335
These tubes go from the case to the heads to house the push rods.
Application:Part #: 151947131B
This is the mirrior you look at to see how fast that mack truck is coming up on you.
Application:Part #: 311721509
This will replace a worn out pivot for the stock accelerator assembly, to replace this pivot you will have to remove the whole pedal assembly.Make sure you use some white grease on the pin where it mounts to the pedal to insure that it lasts longer..
Application:Part #: 1101141
1/2" Longer 10mm Case Studs
Application:Part #: 6857638
Weld on Dash Grab Handle.
Application:
