Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Billet Steering Damper Bracket to be used on Sand Buggies on Aftermarket Aluminum Link-Pin Front Axles
Billet Steering Damper Bracket to be used on Sand Buggies on Aftermarket Aluminum Link-Pin Front Axles. If you want to add a steering damper you'll have to buy the damper bracket. You should'nt use these beams on bajas or any dirt cars.
Race/Off-Road: -65
No customer reviews for the moment.
Part #: 1129607
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 221845305A
New replacement glass for pop out window frames.
Application:Part #: 211837621
Vent Wing Gutter Left
Application:Bus (Type 2); 55-67
Part #: 143845212BR
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: AL8275
This unit supplies the battery with voltage.
Application:Part #: 1117698
When mounting the oil cooler above the transmission on a Bug, Type 3, Ghia, Thing, or Off Road car you can use these rubber mounted studs.
Application:Part #: 113957099A
When you go around a corner, this unit keeps the needle in the fuel gauge from jumping around radically.
Application:Part #: 131405371G
These joints are located in the ends of the control arms.
Application:Part #: 211847516WG
This latch screws onto the safari window latching it closed.
Application:Part #: 6415064
It's super compact, light weight and easy to mount on Buggies or Sand rails.
Application:Part #: 211867615A
These are the clips and boots that hold on the door panels.
Application:Part #: 1117101
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 113953051K
Turn Signal Bulb Holder, Each
Application:Part #: 1141027
Kennedy Stage 3 Pressure plate 2600 LB
Application:Part #: 6501205SW
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 1601070CAP
EMPI Smoothie Replacement Chrome Center Cap
Application:
Billet Steering Damper Bracket to be used on Sand Buggies on Aftermarket Aluminum Link-Pin Front Axles
