Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These handles go on the inside of the front doors to open them.
These handles go on the inside of the front doors to open them. On bugs up to 1967 and on buses up to 1963 you will need to push back the small plastic bezel. You will see a pin coming in from the side. Use a small punch or a nail with the head removed to drive the pin out. We suggest you do this in a clean area because the pin usually flies out and you will want to be able to find it. Once the pin is out, wiggle the handle and it will come off. On 1968 and later cars, you will need to pry out the plastic cover inside the lever. Behind it you will need to remove the phillips screw. Then take the door panel off. There are two 10mm headed bolts that hold the latch on.
Bug (Type 1): 67-79; Conv. 74-79
Type 3: 68-73
Ghia: 67-74 (Dual screw mount only)
Race/Off-Road: 67-79
No customer reviews for the moment.
Part #: 211847515
This latch screws onto the safari window latching it closed.
Application:Part #: 113707103D
This is what gets smashed up first in an accident.
Application:Part #: 1883407CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 112920228
28mm Main Venturi for 40/44 HPMX (EMPI), 44 IDF (WEBER)
Application:Part #: 1198094A
All kits come with pistons, cylinders, rings, wrist pins and clips.
Application:Part #: 241853579
Body Molding End Cap
Application:Part #: 211707002AM
Complete Rear Bumper assembly MINUS mounting brackets, bare steel
Application:Part #: 1101483
Valve Cover Gaskets for Super Flo Heads
Application:Part #: 6798074
SS Roller Pedal Cable Bracket
Application:Part #: 111698700
Steel Brake Line Kit (7 Pieces)
Application:Part #: 6601002WH
These are the most popular off road wheels.
Application:Part #: 261829575
These rubber buffers go on the gates and body of single and double cab Buses to prevent the gates from banging into the body.
Application:Part #: 1405319
The eccentrics set the camber on ball joint front ends.
Application:Part #: 211853322BGR
Outside Scraper with molding, Right, German
Application:Part #: 111831421
These pins are in the door hinges.
Application:Part #: 111919051A
Fuel tank sender
Application:
These handles go on the inside of the front doors to open them.
