Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Kits contain the pins, bearings and shims which attach the spindle on king and link front ends to the axle beam. They allow the spindle to move up and down. The only way you can check yours is to tear them out of the spindle. Once you have them out look for pits in the pin, outer race and bearing. Count your shims and make sure you have 8 per pin. The reason you don't see 1963 listed is on a 63 it is one or the other. 1955-1962 is a 20mm pin and 1964-1967 is a 22mm pin. You will also see here good used parts as well.
Bus (Type 2): 64-67
No customer reviews for the moment.
Part #: 261813164M
This is what the battery sits on.
Application:Part #: 1105723
Chevy Rod Bearings .030
Application:Part #: 141837036B
Passenger Side Door Stricker Plate
Application:KG; 67-74
Part #: 2129702
We have found this kit to be a good, cheap dual carb kit for a stock motor.
Application:Part #: 113955425
This is a screw on wiper blade for bug up to 1957. It does NOT come with the arm like the factory blades did. So you will have to buy part number 113955407A and 113955408A. We can NO longer get the factory style blades that came with the arm. Blades are sold each
Application:Bug (Type 1); -57
Part #: 251419831A
These are the boots for the rack and pinion units.
Application:Part #: 113853505CSL
Front Hood Molding
Application:Part #: 6823564
There are two types of hold downs, rubber and steel.
Application:Part #: 111405641B
These are the inner bearing seals on the drums or rotors.
Application:Part #: 09003
The plug wires run from the distributor cap to the spark plugs and coil.
Application:Type 3; All
Part #: 1201511
Fuel Filter, Inline, Aluminum Black, -6 AN Male Inlet/Outlet
Application:Part #: 111405631B
Link Pin Bearings Spacer
Application:Part #: 6117010
These bolt on mounts allow you to bolt the filter adapter under the driver's side fender or hang it off the exhaust flange..
Application:Part #: 6401300A
If your stock bushings are worn out or you have an aluminum beam, we offer the following urethane bushings and replacements..
Application:Part #: 211953051
Turn signal Bulb Holder, Front Bullet Type Blinker
Application:Part #: 111105401EMP
New Connecting Rods, 13-1600cc, Set of 4
Application:
