Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the glues and oils we use..
These are the glues and oils we use.
Bug (Type 1): 11oz
Bus (Type 2): 11oz
Type 3: 11oz
Ghia: 11oz
Thing: 11oz
Race/Off-Road: 11oz
No customer reviews for the moment.
Part #: N901511
Allen Head Door Handle Screws, Pair
Application:Part #: 6415811A
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 3/4"-16 LH
Application:Part #: N110632
Cap Nut, Backrest to Lower Seat Frame, 6mm
Application:Part #: N102473
This is a list of the most common bolts used on a car..
Application:Part #: 1109451
This style of adjusting screw has a ball with a flat side on the end.
Application:Part #: 151883405
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 113609237D
These four shoes or linings are in the front drums and are sold on an exchange basis.
Application:Part #: 1405371WG
These are new lowered ball joints pressed into reconditioned arms. They are sold on an exchange basis. If you would like to order these before sending your old arms in, please add part number 311405371WGC to your order. That is the core charge. Once you send back your old arms we will refund that amount, providing your arms are good.
Application:Part #: 111701263
This bushing wraps around the front shift rod.
Application:Part #: 1501606CH
EMPI wheel adapters 4-130 to 5-205, 9.5mm Thick
Application:Part #: 6301267
Front Transmission Solid Mount with Hardware
Application:Part #: SR28X
This is what starts the car.
Application:Part #: 039256092C
Heater Box T2 Right Non-CA
Application:Part #: 1109336
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 001301209A
Nose Cone Seal Holder
Application:Part #: 6411107
Thru Rod 5" and 6" Wider Beam, 46.5" Long, Boxed
Application:
These are the glues and oils we use..
