Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the glues and oils we use..
These are the glues and oils we use.
Bug (Type 1): 32oz
Bus (Type 2): 32oz
Type 3: 32oz
Ghia: 32oz
Thing: 32oz
Race/Off-Road: 32oz
No customer reviews for the moment.
Part #: 111707336B
These brackets hold the bumpers on.
Application:Part #: 1601068C
Empi Cosmo, 5x205, 15x5.5"
Application:Part #: 141945177B
This seal goes between the tail light housing and the body of the car..
Application:Part #: 2611011
This kit allows you to run a 71-79 bus master cylinder on a pre 66 bus.
Application:Part #: 1129610
This air cleaner takes the place of a stock air cleaner.
Application:Part #: 1845201SASHS
This kit comes with everthing you need to eliminate your vent window, tempered glass, felt window channels, inner and outer snap in scrappers.
Application:Part #: 261827575
This little chrome cover goes on the engine lid for buses up to 1966.
Application:Part #: 133945224A
These are the rear lenses for the tail light, brake light and turn signal light.
Application:Part #: 211405439
This seal goes between the arm and the spindle on buses with king and link pin front ends.
Application:Part #: 143845211BL
These seals slide into a channel sealing the front door window glass on a Ghia.
Application:Part #: 1127111ALM
AN Adapter No. 6- 1/4 NPT
Application:Part #: 1601107A
Chrome Lug nuts, M14-1.5, Acorn 60 degree Style (Set of 4)
Application:Part #: 1115105E
Oil Pick Up Tube Cut To Length
Application:Part #: 113141701F
This shaft holds the throw-out bearing in place.
Application:Part #: 111941161A
These are a sealed unit.
Application:
These are the glues and oils we use..
