Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This cable goes from the battery to the starter.
This cable goes from the battery to the starter. Please make sure you have a grommet where the cable goes through the sheet metal. We see major melt downs when the metal cuts a hole in the cable because a grommet is missing and the battery shorts out. Also read the NEGATIVE STRAP about the battery.
Bus (Type 2): 52-66
No customer reviews for the moment.
Part #: 071101061D
New complete head Square port
Application:Part #: 1898122
These window seals don't have the groove in them for the chrome trim, giving the car the Cal Look.
Application:Part #: 211703022
Sections that are used for repairing the frame.
Application:Part #: 211798005B
Splash Pan Install Kit
Application:Part #: 1109341OR
Replacement O-Ring Set 16 pieces
Application:Part #: 1827152A
Billet Aluminum Deck Lid Stand-Offs
Application:Part #: 6115468
These are a nice unit and much better for off road cars than the cast aluminum breather box.
Application:Part #: 411837097
Chrome Plated Handle Escutcheon
Application:Part #: 1129505011
These are some of the most common jets used.
Application:Part #: 211809164A
Rear Wheel Well Arch, Right
Application:Part #: 2101000
This is for converting a non hanger case to accept a hanger.
Application:Part #: 6401023B
These clamps are made to go around your front axle beam and are used when building rail cars or stiffening up the front head of a baja Bug..
Application:Part #: 211415049BCO
Due to the core shortage we will need you to send in your old steering box first.
Application:Part #: 1119526BK
This tin goes from one piece of cylinder tin to the other.
Application:Part #: 111809085CD
Quarter Panel, Rear Portion, with Bumper Retainers, Left
Application:Part #: N113081
Some of the more common nuts you might need..
Application:
This cable goes from the battery to the starter.