Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
These are the interior panels.
These are the interior panels. We could write a book on this subject alone. The part numbers listed here are just the basic number. When you place your order, you will be asked for the color. Brought to you proudly by TMI. Note: On Buses up to 1967, we can not get the original material. The driver's side panel on all Buses, except Trucks, comes in three pieces, instead of the one giant original piece.
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 6415811C
Tapered Chromoly Bung, mainly used for fabricating Tie Rods on Offroad/Race Applications. Thread 7/8"-14 LH
Application:Part #: 211609638A
Clamp for E-Brake to Backing Plate, Right
Application:Part #: 211611761
Master Cylinder to Pressure Regulator Brake Line
Application:Part #: 025251509A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 311721335A
This cable pulls the arm that releases the clutch.
Application:Part #: 141883406
Like the door panels, seat covers are a long subject; so here's the basics.
Application:Part #: 211941323
This is the replacement lens and seal for the backup lights.
Application:Part #: 111251165B
Muffler Tail Pipe
Application:Part #: 1881091
We really like the style and comfort that these seats provide.
Application:Part #: 211698301
This kit is for rebuilding the wheel cylinder.
Application:Part #: 1109339
These push rod tubes are spring loaded and are great for replacing bent tubes without having to pull the head(s) off.
Application:Part #: 111012525BK
If you don't have a cigarette lighter, you will need to drill a hole in the dash.
Application:Part #: 113881316R
These are the cover plates that go on the bottom of the seat frame..
Application:Part #: 111863001
Rubber Floor Mat Set, Black
Application:Part #: 113301265E
These rubber mounts hold the transmission in place.
Application:Part #: 111411151
Grub Screw for Torsion Bar
Application:
These are the interior panels.
