Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.
This adapter is used to mount an oil filter either by itself or in line with an oil cooler. On bugs we usually mount them in the driver's side fender well, just under the tail light wires. See 1117011 for a slick mount for bugs.
Bug (Type 1): All
Bus (Type 2): All
Type 3: All
Ghia: All
Thing: All
Race/Off-Road: All
No customer reviews for the moment.
Part #: 1117098
When plumbing the oil filter, oil cooler and/or case, these are the fittings you will need.
Application:Part #: 1117108ALF
These fittings are used for the stainless steel hose.
Application:Part #: 111117151
This stock oil cooler cools the hot oil coming from the engine.
Application:Part #: 1115420
This is one way to adjust your oil pressure.
Application:Part #: 1115431
This hex drive replacement plug is for the case relief spring(s).
Application:Part #: 1129614F
This fitting can be used when routing your breather hose into your air cleaner.
Application:Part #: 1115453
This stock oil filler and cap has been chromed.
Application:Part #: 311115175A
This screen fits in the sump around the pick up tube.
Application:Part #: 111115161
These nuts prevent oil from leaking around the oil pump studs.
Application:Part #: 1115422
These stronger springs were designed to boost the oil pressure in your motor.
Application:Part #: 111115487
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 1117103ALM
These fittings are used for the stainless steel hose.
Application:Part #: 1115458
The smooth flow design has a nice look and comes with a knurled cross-groove or smooth billet grooved cap for a good grip when it is wet or oily.
Application:Part #: 1117023
Mesa coolers are the state of the art oil coolers.
Application:Part #: 1115610RD
Billet Dipstick, Red
Application:
This adapter is used to mount an oil filter either by itself or in line with an oil cooler.