Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N109052
Screws for replacement pop out window frames. These screws are for joining the two Popout frame halves together
Application:
These are the lenses that go over the front turn signal bulb holders.
These are the lenses that go over the front turn signal bulb holders. Don't over tighten the screws or the lens will crack.
Bug (Type 1): 64-67
Off-Road: 64-67
No customer reviews for the moment.
Part #: 1101346
36 HP Barrel Shims .060 (4)
Application:Part #: 6129650476R
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: 141837240
This seal goes between the handle and the body.
Application:Part #: 211698151F
These brake pads go into the calipers and are sold in sets of four; two per caliper.
Application:Part #: 113798054R
Stainless Steel Rear Bumper Overrider Set
Application:Part #: 211498211AWG
These spindles have reconditioned king pins and are ready to bolt back on. They are sold on an exchange basis and come with new king pins. They do NOT come with link pins, so look at yours to see if you need new ones. Most of the time you do not need new ones as they are a bearing and not a bushing. If you would like to order these before sending your...
Application:Part #: 6857650
Billet Deluxe Whip Antenna Mount for 1.5" Tubing
Application:Part #: 2885805CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 6501149100F
These boots and flanges are designed for axles with very long suspension travel.
Application:Part #: 144867501
This is the vinyl covering for the inside roof and sides of the Ghia.
Application:Part #: 113837235AGY
This plastic "donut" goes under the window crank or door handle to prevent the door panel from getting ripped.
Application:Part #: 113853505FSL
Hood Molding
Application:Part #: 141853901B
Body Emblem, Convertible
Application:Part #: 111127591A
Fuel Line Grommet 8mm
Application:Part #: 1407182
This is almost a must for Super Beetles.
Application:Part #: 1109619
Dual Spring Shims, .030" 8 piece
Application:
These are the lenses that go over the front turn signal bulb holders.
