Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
Jaycee Billet IDA Stacks, Silver, Each
Jaycee Billet IDA Stacks, Silver, Each
3.25" Tall
Race: All
No customer reviews for the moment.
Part #: 111945191E
This seal goes between the tail light housing and the body of the car..
Application:Part #: 113845521CL
This seal is for the rear window.
Application:Part #: 211945119A
This is the lens that you see on the side of the bus in the front and the rear.
Application:Part #: 113611021CGR
Brake Master Cylinder
Application:Part #: 151857551EBK
These are the visors you pull down to keep the sun out of your eyes.
Application:Part #: 1117102ALF
These fittings are used for the stainless steel hose.
Application:Part #: 1711105
The aftermarket shifters listed here, shorten the shift pattern considerably.
Application:Part #: 1945245
These were popular back in the 50's.
Application:Part #: T1101211
This 1/2" drive tool takes off the oil filler.
Application:Part #: 311201219A
This hose goes from the filler neck to the tank.
Application:Part #: 029198075CH
These come in sets of four pistons with rings, four cylinders, four wrist pins and eight wrist pin keepers.
Application:Part #: 6711150A
This box is made so you can weld it to a piece of 1 1/2" tubing and mount it to your shifter.
Application:Part #: 1127026H
Fuel Pressure Regulator, Tumble Polished Finish, 1-4 PSI
Application:Part #: 111837581J
On Bugs up to 1967 and on Buses up to 1963 you will need to push back the small plastic bezel.
Application:Part #: 1707135BCH
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:
Jaycee Billet IDA Stacks, Silver, Each