Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the mechanism that makes the window go up and down. Getting the mechanism out is a pain. You will have to start by taking the door panel off and then disconnect the glass from the regulator. Now you're ready for the tough part. The vent wing post has to come loose so look for a bolt holding it to the inner skin of the door. Pay attention to how the regulator is installed in this area, as you will want to put it back the same way. Note: We lay the regulator down flat before installing, squirt some Triflow on the cable and then roll it up and down a few times. This will help the regulator last longer.
Bus (Type 2): 68-79
No customer reviews for the moment.
Part #: 025251509A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 213707177
Bumper Overrider Bow, Fits US Style front bumper, comes in Grey Primer
Application:Part #: 1707135APL
This is one of the original bumper options that was used on the first Cal-Look Bugs back in the 70's.
Application:Part #: 281843799
This beading goes betwen the body and the rail cover that hides the arm for the sliding door.
Application:Part #: 141564712
This steering wheel is a very cheap steering wheel in comparison to the Leccara wheels.
Application:Part #: 141871042
This boot keeps the wind from ripping up your top when it is down.
Application:Part #: 1115450BC
Replacement Oil Cap Billet Polished
Application:Part #: 113201179A
Filler Hose Breather, T Piece
Application:Part #: 1883408CU
Like the custom door panels these car seat covers are a great way to customize the interior of your Bug.
Application:Part #: 113501283
If a rear axle bearing is bad, you will have excessive play in the rear wheel.
Application:Part #: 144867501
This is the vinyl covering for the inside roof and sides of the Ghia.
Application:Part #: 241853341
Angled Window Molding Clip
Application:Part #: 021101403A
If you're rebuilding your own heads, you will probably need guides.
Application:Part #: 133971119
The electrical harness runs everything on the car.
Application:Part #: 265255731
Heater Hose for rear Passenger Area, Double Cabs Only
Application:Part #: 311721335
This cable pulls the arm that releases the clutch.
Application:
