Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
This spacer goes between the steel cam gear and the brass distributor gear on the crank. The stock spacer is a split ring but this one is a solid ring.
Bug (Type 1): 40hp-1600
Bus (Type 2): 40hp-1600
Type 3: 40hp-1600
Ghia: 40hp-1600
Thing: 40hp-1600
Race/Off-Road: 40hp-1600
No customer reviews for the moment.
Part #: 311105295A
This seal goes in the flywheel.
Application:Part #: 111105263A
The bolt that holds the crankshaft pulley on.
Application:Part #: 113105241A
This is a large concave washer that goes on the crank after you have the nose bearing on.
Application:Part #: 111903221S
Replacement Bearings for Serpentine System
Application:Part #: 111105271RC
These flywheels have been reconditioned and are sold on an exchange basis.
Application:Part #: 1105401AC
These connecting rods are longer than stock.
Application:Part #: 113105249
This key holds the oil deflector in place as well as aligns the front pulley.
Application:Part #: 1105251ALRD
Aluminum Stock Crankshaft Pulley Red
Application:Part #: 111105719A
Rod Bearings .30
Application:Part #: 1105401B
These connecting rods are longer than stock.
Application:Part #: 113105281A
These shims set the endplay of the crankshaft.
Application:Part #: 111198455
Main Bearings, 25-36 HP
Application:Part #: 111105701A
These are the shells that go in the rods and ride on the crank.
Application:Part #: 1105253BL
This is a crank pulley for an upright motor.
Application:Part #: 1903108BLK
EMPI Serpentine Belt System Black
Application:Part #: 113105271BCO
These flywheels have been reconditioned and are sold on an exchange basis.
Application:
This spacer goes between the steel cam gear and the brass distributor gear on the crank.
