Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the mechanism that makes the window go up and down.
This is the mechanism that makes the window go up and down. Getting the mechanism out is a pain. You will have to start by taking the door panel off and then disconnect the glass from the regulator. Now you're ready for the tough part. The vent wing post has to come loose so look for a bolt holding it to the inner skin of the door. Pay attention to how the regulator is installed in this area, as you will want to put it back the same way. Note: We lay the regulator down flat before installing, squirt some Triflow on the cable and then roll it up and down a few times. This will help the regulator last longer.
Bug (Type 1): 68-74
Off-Road: 68-74
No customer reviews for the moment.
Part #: 211611741B
These are the metal brake lines found throughout the car.
Application:Part #: 111115485
It caps the hole you are aiming at while pouring oil over everything else.
Application:Part #: 6501206IRS
These plates are .250" thick, that means they can handle the abuse of off roading.
Application:Part #: 113609721B
These cables set the rear brakes.
Application:Part #: 211405625
These bearings go in the drum or rotor hub to allow them to spin.
Application:Part #: 1198094BWVP
Wiseco 94mm with Valve Pockets Pistons & Cylinders
Application:Part #: 1501205IRS
Now you can dial in your suspension in an instant.
Application:Part #: 113119585B
These seals go over the stock H pipes where they come through the front pulley tin.
Application:Part #: 221847131A
Seals the side popout windows on buses up to 1967.
Application:Part #: 1827329
This spring replaces the stock spring you might have thrown away when you put the deck lid stand offs on.
Application:Part #: 211843423A
Upper Front Roller Bearing for Sliding Door
Application:Part #: 361698301
This kit is for rebuilding the wheel cylinder.
Application:Part #: 231070700
This holds the pop top down on campers..
Application:Part #: 311501191
This snubber keeps the rear suspension from bottoming out hard.
Application:Part #: 1129511B
Kadron Carburetor Linkage Ball Socket Ends, 10/32 Left & Right, Pair
Application:
This is the mechanism that makes the window go up and down.
