Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector. The collector is the most important part of a header. We suggest using a single quiet muffler on engines that have a stock carburetor or two, one-barrel carbs. You should run dual mufflers or one giant muffler on engines that have two, two-barrel carbs. If you're using the stock intake manifold, you'll need to drill out the heat riser stands on the header.
Type 3: 1500-1600
No customer reviews for the moment.
Part #: 1251262
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251202D
This is the 3-bolt gasket that goes between the muffler and the header.
Application:Part #: 3251001
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251261
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 111251241A
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1251210
These are two of the different types of exhaust nuts.
Application:Part #: 3251000
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 1251161
A stinger (depending on your motor combo) makes horsepower at 5K RPM and above.
Application:Part #: 1251200
This kit comes with four flanges, two for the heater boxes and two for the header. Sold EACH, 2 required.
Application:Part #: 1251262C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251261C
Paper gaskets are not our favorite, but if you are running larger ports, you have to use them.
Application:Part #: 1251211B
Brass Exhaust Nuts 8mm-1.25 thread, 11mm Head (100 per kit)
Application:Part #: 3256091
Also called J-tubes, these tubes fit most header systems and replace the stock heater boxes, so you will lose your heat and defroster..
Application:Part #: 3251006
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
Application:Part #: 113251263
This kit includes the gaskets and hardware to install a stock muffler or tail pipes..
Application:Part #: 1256091
J-Tubes, replace stock heater boxes, eliminates heater and saves weight, come with gaskets, sold in pairs
Application:
We like to run EMPI deluxe headers because they have the best fit, as well as, a good merge on the collector.
