Part #: N109051
Side Popout Window Frame Screws (3.5mmX6mm) Frame to Hinge
Screws for replacement pop out window frame to hinge
Application:- Bus (Type 2): -67
Part #: N109051
Screws for replacement pop out window frame to hinge
Application:Part #: 211837659
This nylon washer goes on the wing bolt keeping the bolt from chewing up the slide on the safari window. Washers sold individually 8 are required for Front Safaris and 4 are required for Rear Safaris.
Application:Part #: N107101
This is a list of the most common screws you might need..
Application:Part #: N185164
Screws for replacement pop out window Latches to Body
Application:Part #: N139681
This is a list of the most common screws you might need..
Application:Part #: N203551F
These are new hoses that are more resistant to Ethanol, meaning they last longer. This type of hose is what we now recommend.
Application:
This is the channel that the front door windows roll up into.
This is the channel that the front door windows roll up into. In order to put these in, the door panels will need to be taken off and a lot of the guts of the door will have to be removed. If you are replacing these we suggest you replace the channel that runs up the vent wing post as well. On Buses up to 1967, see Front Door Window Felt Set.
Bug (Type 1): 52-77
Bus (Type 2): 68-79
Type 3: 64-74
Off-Road: 52-77
No customer reviews for the moment.
Part #: 211898000
Bus Ignition, 2 front locking door handles and rear hatch handle all keyed alike, only 2 keys included!
Application:Part #: 04010
These are the parts found in the distributor.
Application:Part #: 153863010
These are the interior panels.
Application:Part #: 113837205A
These are the front door handles.
Application:Part #: 111881372
This is the padding that sits on top of the springs of the seat.
Application:Part #: 211813164N
This is what the battery sits on.
Application:Part #: 113823461A
This handle is on end of the cable that releases the gas door.
Application:Part #: 2711099PL
Gear shift extensions angle back and add about 5" of length to your stock shifter, which allows you to reach the shifter without leaning forward..
Application:Part #: N185101
These fittings fit on the front end so you can pump grease in the front suspension..
Application:Part #: 1401023
Longer bolts for the front end
Application:Part #: 1105258
This is a stock, zinc-plated crankshaft pulley bolt that has a 3/8" drive hole broached into the center.
Application:Part #: 6129650473R
Outerwear pre-filters feature a patented; Micro Mesh nylon filtration system that stops sand and dirt before it gets to your air cleaner element.
Application:Part #: AL27X
This unit supplies the battery with voltage.
Application:Part #: 1198035
If you are converting a single port engine to a dual port or if you have a brand new case; these are the head studs you're looking for.
Application:Part #: 6937555
Weather Proof GM Style Fuse Box, 10 position Standard Blade Style, Sealed Body and Clear Top
Application:Part #: 113853111A
Door Panel Molding Set 5 pcs
Application:
This is the channel that the front door windows roll up into.